Cornick Help Center

    Adding Cameras on an NVR to an Intercom Monitor

    July 19th, 2019

    Note: The IP address of the NVR and the Intercom Monitor need to be within the same range for this to work.

        Tap on Monitor

        Tap on IPC

        Tap on Add

    1. Tap on "IPC" and change it to "NVR"
    2. Enter the IP address, Username & Password of the NVR.
    3. Enter the channel of the camera on the NVR you wish to add.

        Repeat the above for each camera you wish to add.

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support