Cornick Help Center

    Intercom Door Latch / Gate / Exit Button Wiring

    September 30th, 2020

    Before connecting the Door Station to a door latch or gate motor, refer to your door latch or gate motor installation manual for specific product information. The Door Station uses a dry contact relay, rated at Max 2A 30VDC.

    If wiring the Door Station to anything other then a door latch, such as an electric gate with dry contacts, it is recommended to use an external relay.

    If you require 2 door latch outputs to be triggered individually, the INTIPDM is required to trigger a second latch. In the diagram below the INTIPRDSG Door Station is being used and is utilising the 12V output. This can be substituted for a 12VDC Power supply.

    If you require a push to exit button, ensure it is a NO button. Wiring the latch as per one of the three diagrams, then connect your button.

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support