Cornick Help Center

    WGAP864 alarm panel set up shortcuts

    February 22nd, 2019

    Setting date and time

    1) Press and hold * button

    2) [Master Code] * 4 0 * [hhmm] * 4 1 * [ddmmyy] * #

        where hh=hour in 24-hour format (00-23), mm=minute (00-59)

        ddmmyy=day (01-31), month (01-12) and year (01-12) respectively


    Setting exit delay

    [Installer Code]  * 2 3 0 * [Partition Number]* [mmss] *##

        where mm=minute (00-59) and ss=second (00-59)


    Setting entry delay

    [Installer Code] * 2 3 1 * [Partition Number]* [mmss] *##

        where mm=minute (00-59) and ss=second (00-59)


    Setting siren output time

    [Installer Code]  * 1 7 * [Siren Time]* [mmss] *#

        where mm=minute (00-59) and ss=second (00-59)

    Warning: It is an offence for an intruder alarm to be heard in any neighbouring residence when it sounds for more than: 5 minutes if installed on or after 1 December 1997 NSW.


    Setting zone types

    [Installer Code]  * 1 * [Zone Number] * [Zone Type] *…# #

    Zone Type Value Zone Type Value
    DISABLED 0 Instant Fire Zone(New) 9
    PRIMARY ENTRY/EXIT ZONE 1 FIRE ZONE 10
    FOLLOWER ZONE 2 TAMPER ZONE 11
    PANIC/PRIORITY ZONE 3 24 HOUR ALARM ZONE 12
    INSTANT ZONE 4 WARNING ZONE 13
    ARM/DISARM ZONE 5 PUSH TO ARM ZONE 14
    SECONDARY ENTRY/EXIT ZONE 8 OUTDOOR INSTANT ZONE 15

    Managing user codes


    Add User Code:

    1) Press and hold * button

    2) [Master Code] * 0 * [User Code 1] * (wait for beep)  [User Code 2] * (wait for beep)....# #


    Change User Code:

    1) Press and hold * button

    2) [Master Code] * 1 * [Old User Code] *  [New User Code] * # #


    Delete User Code:

    1) Press and hold * button

    2) [Master Code] * 2 * [Use r Code to be deleted] *  # #


    Delete all User Codes:

    [Installer Code] * 0 * 2 * #


    Changing installer code -  Use with caution

    [Installer Code] * 197 * [New Installer Code ] * #


    Reporting Options


    Setting account code

    [Master Code] * 6 1 * [4-digit Account Code] *  #


    Setting telephone numbers

    [Master Code] * 5 1 * Telephone number 1] *

                                  5 2 * Telephone number 2] *

                                  5 3 * Telephone number 3] *

                                  5 4 * Telephone number 4] * #

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support