Cornick Help Center

    Ubiquiti Troubleshooting

    March 28th, 2019

    WT5-UNS - Nanostation M5

    Problem Solution
    Not connecting Confirm SSID and Password are matching on both devices. One device is set to "AP" and the other "Station".
    No Power - No Power Lights on the back Ensure the Ubiquit PoE Injector is plugged in, or a Ubiquit ToughSwitch setup in 24V mode is being used.
    Unit defaults its settings on its own. Check for faults with the cable to the device, if problem persists, turn off the "Remote Reset" option. Ensure the password for the device is recorded, after turning this option off, there is no way to reset the password.


    WT5-ULB - Litebeam 5AC

    Problem Solution
    Not connecting
    Confirm SSID and Password are matching on both devices. One device is set to "AP" and the other "Station". 
    No Power - No Power Lights the bottom of the unit. Ensure the Ubiquiti PoE Injector is plugged in, or a Ubiquiti ToughSwitch setup in 24V mode is being used. Check cable for Faults.


    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support