Cornick Help Center

    Adjusting Motion Detection Region & Sensitivity

    March 12th, 2024

    If motion detection is triggering too easily, follow the below steps to adjust the sensitivity and region of detection.

    Black GUI

    1. Go to Main Menu, then Alarm.
    2. On the left hand side select Video Detection. Select the Region Setting button.
       
    3. Adjust the Sensitivity and Threshold. There are multiple region settings if you wish to set different Sensitivity and Threshold settings for different parts of the image. Sensitivity is how easy it is to trigger (30-70 is recommended).Threshold is how much motion is required to trigger an event.  (1-10 is recommended).
    4. Adjust the area of detection by clicking and dragging on the red squares. Red squares are where motion will be detected. Clear squares are where motion will not be detected. Right Click to exit, and select Apply.

    Blue GUI

    Go to Main Menu > Event > Video Detection > Motion Detection

    1. Click the Setup/Setting button next to Region to access the zone, sensitivity and threshold settings for motion detection.
    2. Adjust the Sensitivity & Threshold to suit your environment. High Sensitivity, Low Threshold mans it will be easy to trigger. Low Sensitivity, High Threshold means it is hard to trigger.
    3. Adjust the area of detection by clicking and dragging on the red squares. Red squares are where motion will be detected. Clear squares are where motion will not be detected. Right Click to exit, and select Apply.
    Zone Name: You can set a custom zone name here.
    Sensitivity: Determines how sensitive the zone is to movement. 1 being the lowest and 100 the highest. (30-70 is recommended)
    Threshold: Determines the minimum size of an object that can trigger motion detection. 1 Being the lowest and 100 the highest (1-10 is recommended).

    Camera Web Interface

    1. Navigate to Setting > Event > Video Detection > Motion Detection
    2. Click next to Period to configure the active period for Motion Detection.
    3. Configure the schedule, then click .
    4. Click next to Area to configure the active motion detection area and it's sensitivity.
    5. Add/Remove the coloured squares to configure where motion will be detected. For example you may want to remove the coloured squares that overlap trees. 
    6. Adjust Sensitivity & Threshold if necessary. There are four different colours so you can have four different settings.
      Sensitivity is how easy it is to trigger 30-70 is recommended.
      Threshold is how much has to move to trigger 1-10 is recommended.
      High Sensitivity/Low Threshold will pick up motion easier, whereas Low Sensitivity/High Threshold will be harder to trigger.
    7. Click .

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support