How to Adjust Date and time on Devices.
Recorders
Navigate to Main Menu > System > Date & Time
Adjust date and time as needed.
Enable Daylight Savings time (DST) if applicable to your region and change start and end times.
Start: Oct, 1st Sunday 2:00 AM
End: Apr, 1st Sunday 3:00 AM
Enable Network Time Protocol (NTP) if want time to be Synced with an online Server. (Requires internet connection)
Change Server Address (E.g. au.pool.ntp.org, Canberra Based Server)
Adjust Interval, how often the time will sync with the server
Camera
Grey Interface
Log Into Interface.
Navigate Setting > System > General > Date & Time
Adjust date and time as needed.
Enable Daylight Savings time (DST) if applicable to your region and change start and end times.
Start: Oct, 1st Sunday 2:00 AM
End: Apr, 1st Sunday 3:00 AM
Enable Network Time Protocol (NTP) if want time to be Synced with an online Server. (Requires internet connection)
Change Server Address (E.g. au.pool.ntp.org, Canberra Based Server)
Adjust Interval, how often the time will sync with the server
Blue/White Interface
Log Into Web Interface
Navigate to System > General > Date & Time
Adjust date and time as needed.
Enable Daylight Savings time (DST) if applicable to your region and change start and end times.
Start: Oct, 1st Sunday 2:00 AM
End: Apr, 1st Sunday 3:00 AM
Enable Network Time Protocol (NTP) if want time to be Synced with an online Server. (Requires internet connection)
Change Server Address (E.g. au.pool.ntp.org, Canberra Based Server)
Adjust Interval, how often the time will sync with the server
Intercom Devices
Intercom Monitor Date & Times
Intercom Monitors have their time synced from the Door station and cannot be changed.
to adjust date and time, the changes must be done on the door stations Web Interface
Grey Firmware
Log Into web interface.
Navigate to Local Settings > System.
Adjust date and time as needed.
Enable Daylight Savings time (DST) if applicable to your region and change start and end times.
Start: Oct, 1st Sunday 2:00 AM
End: Apr, 1st Sunday 3:00 AM
Enable Network Time Protocol (NTP) if want time to be Synced with an online Server. (Requires internet connection)
Change Server Address (E.g. au.pool.ntp.org, Canberra Based Server)
Adjust Interval, how often the time will sync with the server
Blue/White Firmware
Log Into web interface.
Navigate to Device Setting > Time
Adjust date and time as needed.
Enable Daylight Savings time (DST) if applicable to your region and change start and end times.
Start: Oct, 1st Sunday 2:00 AM
End: Apr, 1st Sunday 3:00 AM
Enable Network Time Protocol (NTP) if want time to be Synced with an online Server. (Requires internet connection)
Change Server Address (E.g. au.pool.ntp.org, Canberra Based Server)
Adjust Interval, how often the time will sync with the server