Below are the default setting that should be loaded for the SSL-B50MC which is a 12V System.
Note that while the trigger and timing settings here can be changed, however the settings shown in bold are critical to the charging of the battery and should not be altered:
Bat Type: Li_Po
BoostCharge: 14.4
Voltage Low: 10.5
Recover Vol: 12
PowerSaving: OFF
TurnOnPVVol: 5V
Output Cur: 1550ma
DriveMode: Sense
Light Delay: 30s
First Time: 6.00 HR
Light Ratio: 100%
Idle Ratio: 30%
Second Time: 4.00 HR
Light Ratio: 60%
Idle Ratio: 20%
Third Time: 8.00 HR
Light Ratio: 100%
Idle Ratio: 30%
FourthTime: 0 HR
Light Ratio: 0%
Idle Ration: 0%
Fifth Time: 0 HR
Light Ratio: 0%
Idle Ratio: 0%
MorningLight: Off