Cornick Help Center

    How to add devices to DMSS mobile app

    Adding devices to a mobile phone for remote viewing of live and recorded video

     

    DMSS is a remote surveillance app that can be used to view your Devices remotely.

    It can be used access Live view, Recorded playback, get event notifications, and receive calls and unlock door stations away from home.

    DMSS can be found on the Google Play store and iOS App Store.

     

     

     

    How to add devices to DMSS via P2P


      1. Select the Plus Icon At the Top Right.

        


    2. If you are Not Logged in DMSS will give you this Message. At which you can either Log In or continue to the device      as a Local Device.

     

     

     3. Select Scan QR Code

     


    4. Scan the QR code for your Device's Serial Number, then click Next

    Info

    The QR code can be found at Main Menu > Network > P2P (or Easy4IP) on a recorder AND on the box the device came in.

     
    If you don't have a QR code, Select Manually Enter SN button and enter the serial number of your device manually.

     


    5. After scanning your Serial Number It Will Appear in the Box. 

    Note

    The Security code Dialog box is for only for certain Devices are not usually associated with NVR's and Cameras and can be Ignored.

     

    Select Next.

     

     

    6. Select the type of device you wish to add.

    NVR for an NVR for a recorder with IP cameras
    DVR/XVR for a recorder with CVI cameras
    VTO for a Door Station
    Wired Camera for a standalone Camera wired to a switch or router




     7. Enter In details of the Device

           i. Name Device, this is how you'll identify your device (home, office etc.                                                                                 ii. Enter Username of the device.                                                                                                                                                    iii. Enter The password of the Device

         After you've entered those details select Save.

     

     
    8. Confirm your Time Zone and DST is Set correctly. Select Next 

     

     
    9. This Is How It Will Appear on Your Home Screen

     
     

    Adding Devices Via IP/Domain

    If you wish to add a device to DMSS via it's IP address you will need to use Port Forwarding.
    If you are unfamiliar with Port forwarding, we suggest that you use the P2P method outlined above.
     

     


    1. Select Plus Button at top Right

     

     
    2. Select IP/Domain 

      

     
    3. Select Add Mode If you to add via a different mode


     

     

    4. Select on Which Protocol You Will be Using 

     

     
    5. Enter the NVR Information Address, Name, Username, Device Password and Select Save

     
     

    Add Device Over Local Network 


        1. Select Plus Icon At the Top Right.

     

    2. Select Search on LAN


      

     
    3. Select Your Device From The ones Listed

     

     

    4 . Select Add Mode And Select P2P or Domain (Note Selecting Domain/IP will allow access while on the same Network as the device)

     
     

    Video Guide

     

     
     

     

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support