Cornick Help Center

    Adding Cameras on an NVR to an Intercom Monitor

    October 8th, 2024

    Info

    Note: The IP address of the NVR and the Intercom Monitor need to be within the same range for this to work.

    Tap on Monitor

    Tap on IPC

    Tap on Add

    1. Tap on IPC and change it to NVR
    2. Enter the IP address, Username & Password of the NVR.
    3. Enter the channel of the camera on the NVR you wish to add.

        Repeat the above for each camera you wish to add.

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support