To access the web interface enter the IP address of the Camera in a web browser.
If you are connecting remotely, you can use the Link to Web function within Smart PSS.
Web Interface V1
| Live | Live View of Video Feed |
| AI Live | AI Live View - Displays AI Video Feed ( Used when AI Rules are active ) |
| Playback | Playback recorded video from IPC |
| Setting | Adjust Settings on the Camera |
| Alarm | Adjust Alarm Settings and View Alarm Info |
| Logout | Logout of Device |
How to Set Time and Date on a camera
Click Setting
Then click System > General and click on the Date & Time Tab
Settings Overview
DST: Daylight Savings Time.
This must be set to enable day light savings time for your location.
DST Start: 1st Sunday April 3:00AM
DST End: 1st Sunday October 2:00AM
NTP: For network time protocol, can use an internet server to keep device time synchronised 24/7.
How to Set Time and Date on an NVR
Navigate to Main Menu
Click Setting then click System
Click on the Date & Time Tab
Settings Overview
DST Start: 1st Week - Sunday - October - 2:00AM
DST End: 1st Week - Sunday - April - 3:00AM
NTP: The Network Time Protocol (NTP) is used by computers and devices to synchronise their clocks over the Internet.
Server: au.pool.ntp.org :This address is one of Australia's common public NTP servers which you can use)
There is other public NTP addresses that can be used or you can even have your own private NTP server.
Port: 123 : NTP servers need this port to communicate to the device.
Interval: Time between checks if the clock is up to date.
Delete