Cornick Help Center

    Output Control via Keypad

    December 20th, 2022

    This mode is just using turning on/off the power for controlling an appliance only (latch mode). 
    It is used for radio reporting to prevent the triggering of false alarms.


    * Curved LCD Keypad

    [MODE] [1] [3] [*] [OUTPUT NUMBER] [*] [*] [#]

    1. Hold [MODE] down for one second until the keypad beeps twice.
    2. The LCD display reads [Mode Menu] [Partition + *]
    3. Press the [1] key for partition 1 following the [*] key
    3. Press the [3] key for set followed by the [*] key.
    4. The LCD display reads [Mode Menu] [Output Ctrl No +] [*]
    5. Enter the [OUTPUT NUMBER] followed by the [*] key.
    6. Press the [*] key to toggle between ON and OFF.


    * Touch Keypad

    [SWITCH] [1] [*] [3] [*] [*] [OUTPUT NUMBER] [*] [*] [#]

    1. Hold [SWITCH] down for a few seconds after keypad beeps quickly four times.
    2. The LCD display reads [Mode Menu] [Partition + *]
    3. Press the [1] key for partition 1 following the [*] key
    3. Press the [3] key for set followed by the [*] key.
    4. The LCD display reads [Mode Menu] [Output Ctrl No +] [*]
    5. Enter the [OUTPUT NUMBER] followed by the [*] key.
    6. Press the [*] key to toggle between ON and OFF.

     

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support