Cornick Help Center

    Configure Onboard Output 1 & 2 on the 8 Zone expander module as a Siren/Strobe/Chime. Part: WGAP864EXP1664

    Learn how to configure Output 1 or 2 on the 8 Zone Expander Module (WGAP864EXP1664) as a SIREN.

    Product Part Link: https://www.rhinoco.com.au/product/WGAP864EXP1664

     

    Please follow step-by-step instructions below on how to configure the “PGM” 1 & 2 output on the WGAP864EXP1664:

    [*] [1479] = installer code

    [*] 

    [411] = Siren O/P …OR

    [412] = Strobe O/P … OR

    [413] = Chime O/P

    [*] = Sub 1 = Partition 1 - Data 00 = None Output

    [06] = Data Output 1 of the Zone Expander 1

    OR EITHER

    [07] = Data Output 2 of the Zone Expander 1

    [*] = confirmation

    [#] = back to installer mode

    Note: 

    The location [413] the chime options you can enable for the Chime Zone are available in the link below:

    https://help.c5k.info/wgap864exp1664-8-zone-expander-for-16-zones-expansion/programming-onboard-output-1-or-2-on-the-8-zone-expander-module-wgap864exp1664-as-a-chime-zone-x?from_search=130679196

    Configure Onboard Output 1 or 2 on the WGAP864EXP1664 as Chime (3 seconds pulses output)

     

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support