Cornick Help Center

    Keypad Partitions

    - Assigning a Registered Keypad to the Chosen Partition - Configurations -

    A- LOCATION 243 to check Keypad ID  

    [1479] = INSTALLER CODE 

    [*] = Installer Menu

    [243] = Keypad ID – View Data: x (will show this keypad registered ID)

    [#] = return to Installer menu

     

    B- LOCATION 240 Keypad Partition (default = Partition 1)

    Program this location to allocate each keypad to a partition. 

    Enter the partition number to which each keypad, with an ID 1-8 must be allocated. 


     
    [INSTALLER CODE] [*] [240] [*] [KEYPAD NO.] [*] [PARTITION NO.] [*]
                 1479                                     2                             1

    Then keypad screen shows below:

    Sub: Keypad registered number  

    Data: Partition choose (press partition number to choose) then 

    [*] - Default is Data: 1 (partition 1)

     

    Example:

     

    [1479] = Installer Code

    [*] = Installer Menu

    [240] [*] = Keypad Partition – Subloc or String

    Press a number to select the keypad configuration (ex: 2). 

    [*] = Sub 2 – Data: 1 (Keypad 2 – Partition 1)

    Press a number to select the keypad and assign it to the desired partition (ex: 2). 

    [*] = The data will change to the number chosen by you (ex: 1 changed to 2).

     

    Now, the keypad 2 has been changed to partition 2 instead.

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support