How to add a remote to the panel and program relay output 1 & relay output 2.
Default:
- iDS remote: Arm/Disarm: Blue button. Stay Arm: Grey button. Relay1: Black button. Relay2: Red button
- RCTX4-U: Arm/Disarm: Button 1. Stay Arm: Button 3. Relay1: Button 2. Relay2: Button 4
A- Add Remote to Panel.
* Those sections you use them only if the remote is leant using (section 2.5 page 8).
[*] [Master Code] [*] [20] [*] [Receiver Number] [*] [User Code] [*] [*] [Press RT Button] [#] [#]
[*] [1835] [*] [20] [*] [1] [*] [1835] [*] [*] [Blue Button] [#] [#]
B- Set Remote Receiver Button Properties.
* Then you can assign any button for the relay on the remote section (2.8 page 12).
[*] [Master Code] [*] [23] [*] [Receiver Number] [*] [Rx Button] [*] [Property Number] [*] [#] [#]
[*] [1835] [*] [23] [*] [1] [*] [2] [*] [Relay 1 OFF ] [*] [#] [#]
C- Set Remote Receive Relay Properties.
* Then you can choose property number in (section 2.9 page 13).
[*] [Master Code] [*] [24] [*] [Receiver Number] [*] [Relay Number] [*] [Property Number] [*] [#] [#]
[*] [1835] [*] [24] [*] [1] [*] [1] [*] (press >>to Pulse (ON) [#] [#]
D- Set Remote Receiver Relay Pulse Time (Default is 2 seconds).
* Then you can set the relay pulse time in (section 2.10 page 14).
[*] [Master Code] [*] [25] [*] [Receiver Number] [*] [Relay1 00:02] [*] [#] [#]
[*] [1835] [*] [25] [*] [1] [*] [0005] [*] [#] [#]
Relay [1] will now pulse the out put for 5 seconds.