Initial Setup
- Initilize the device by using a web browser and connecting to 192.168.1.108.
- Login using the username of “admin” and password that you just created.
- Select Setup, Network, TCP/IP. You can then change the IP address of the device.
Adding Channels
- Select Setup, Signal Managment, Network Signals.
- Select Device Search.
- Select the check box next to the device you wish to add, select Add, then enter the username and password for the device.
- Once the device is added to the bottom list, double click on it to bring up the connection details. If an recorder is added, you can pick the remote channel number, which is the camera channel from the recorder. Select OK.
Assigning Channels to Video Outputs
- Select Screen from the top menu selection.
- Expand the Network Signal list, and drag the camera Main Stream to the left window. This will be HDMI Output 1. If its dragged to the right screen, it will be on HDMI Output 2.
Note., the camera layout can be customised by selecting the Window Split function.
Adjusting Fluency
- Select Setup, Display Management, Display Setup, Global.
- Enable Decoding Strategy, and set the Fluency to the lowest setting. Select Save.
