Quick Start Guides
Quickly get up and running with your new security camera or NVR
28 Articles in this category
Quickly get up and running with your new security camera or NVR
28 Articles in this category
Info If your VSIPPTZKBV2 firmware is older than 2020-01-06, You will need to upda...
Initialising a camera is the process of setting a password on it. All cameras man...
To record audio from a camera with a built-in or line-in microphone you will need...
There are two different types of recording used on CCTV recorders. Main Stream: F...
You can define the recorded footage schedule in the Record menu, and the recorded...
Motion Detection Motion Detection via NVR (Black GUI) From the Main Menu, select ...
Some installations may require cameras to be added to the NVR over the network. T...
In some situations it may be required to have some cameras displayed on a monitor...
NVR Snapshot Types There are two types of Snapshots, Event or Schedule/Time Base...
If you have purchased a recorder without a hard drive, or wish to install an addi...
In the video above, Jeff demonstrates how important it is to keep water out of yo...
Info This feature is only available on NVRs/CVRs that have two HDMI ports (Black ...
Deterrence Camera Types This guide applies to several models of Deterrence camera...
Follow the steps below to configure your recorder for Remote Access. Warning Have...
What is Corridor Mode? Corridor mode, also know as 9:16 mode, is a feature on mos...
Installation Tips Before mounting the antennas, please read the below points. Use...
IVS Scene Restrictions The object total size shall not be more than 10% of the wh...
Click the Trigger Button to bring up the Trigger menu, configuring what actions a...
Enabling Face Detection by Recorder From the Main Menu, select AI > Parameters...
Step 1 - Initialize camera via the config tool on a PC IP Camera Initialisation W...
Accessing the Camera for Setup You will need to configure the camera though it's ...
(Black GUI) How to Set Original Scale Go to the MAIN MENU, then click on the 2nd...
Info The Auto Network Replenishment (ANR) function allows an NVR to download reco...
CVRs can allow you to add IP cameras to open channels. Some models will have addi...
Selecting the Instant Playback button will allow you to view the last 60 minutes ...
How to Connect a USB WiFi adapter to an NVR Connect the adapter to the USB port o...
Using Smart PSS to Update Account Settings Ensure your device is already connecte...
Initial Setup Initilize the device by using a web browser and connecting to 192.1...