Quickly get up and running with your new Intercom
13 Articles in this category
3rd Generation 2-Wire How to identify a Gen.3 INTIPRDSG Both the box and the prod...
This setup method is intended for configuring single call-button Door Stations to...
Cards/Keyfobs Swipe Cards and keyfobs can be used to unlock Door Stations with a ...
When mounting the door station, ensure that it is at an adequate height so that i...
Normally Closed and Normally Open wiring Before connecting the Door Station to a ...
No Network Connectivity (No Phone App) Using 12VDC and direct connection between ...
This method requires a computer to set up and is more involved than the One-key C...
This method requires a computer to set up and is more involved than the One-key C...
When setting up a 2-button or 4-button Door Station, additional setup is required...
When setting up monitors for group call (calling more then one Indoor Monitor at ...
On some occasions, you may need to change the IP addresses of the intercom device...
Auto capture is a setting for the door station that allows you to capture your in...
Info This guide assumes that the Intercom system has already been configured. Ref...