Cornick Help Center

    Arming different partitions using the same keypad.

    May 26th, 2023

    All Keypad must be Enable Global status which can be moved into any partition to view or control partition.

    LOCATIONS 251 to 258 - Keypad Options 

    These locations are used to configure options for a keypad. 

    Each location represents a keypad:

    ex: Location 251 is keypad 1 

    Table 26: Keypad Options Data

    LED

    Default

    Action

    1

    ON

    The keypad will timeout back to its default partition after it has been used to view another partition

    2

    OFF

    Keypad sleep mode

    3

    OFF

    Global Keypad Status (Keypad can be moved into any partition to view or control partition)

    4

    OFF

    Display all of Zones from all Partitions

    5

    OFF

    Shows all Partitions on key press 1,5 & 6

    6

    OFF

    Stay Profile Menu

    7

    OFF

    Enable keypad buzzer to follow siren

    8

    OFF

    Global keypad to chime on all partition set chime zones

    [#] [1479] = installer code

    [*] = installer Menu - Location [***]

    [251] = KP 1 Options – Data: 1 [Y]

    [>>] [>>] = KP 1 Options – Data: 3 [N]

    [*] = changing to choose [N] to [Y]

    [#] = confirmed and exit.

     

    Do the same to KP2 etc… to Enable Data 3 on the Keypad Options.

     

    How this function works.

    SQUARE TOUCH KEYPAD.

    Press the [partition] button on either keypad you wish to control to arm other keypads.

    [1 r] [2 r] = KP1 & KP2 are ready

    [1] = KP1 = the partition number you need to arm 

    The keypad will access that particular partition [1] and you will be able to arm with your code or by pressing and holding the number [1] button.

    This KP will automatically return to the originally registered KP after 20 seconds.

    OVAL KEYPAD. 

    Press & hold [Modebutton on either keypad you wish to control to arm/disarm other keypads.

    Mode Menu – Partition

    [*] = [1 r] [2 r] = KP1 & KP2 are ready

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support